Pool Waterproofing Membrane For Swimming Pools Waterproofing
There are many types of pools, including fire water pools, swimming
pools, elevator shafts, drinking water pools, sewage treatment
pools, and other pools of varying sizes with cement structures. Due
to the different size of the reservoir, the water depth is
different. However, due to the perennial water soaking, once the
repair cost is high after the leakage, the construction
requirements for the waterproof material are high. Therefore, we
believe that the selection of waterproof material is extremely
Swimming pool waterproofing
Drinking water pools
DWD Waterproofing membranes
DWD waterproofing membrane can be applied to the above reservoirs
waterproofing projects. DWD waterproofing membrane is an excellent
waterproof material that fits perfectly with the cementitious
substrate. Its weldable function - waterproofing membranes’
overlaps can be welded by hot air guns, guarantees your waterproof
engineering no leakage in a long time. Moreover, it is also an easy
installation of the waterproofing membrane, which can greatly save
your construction period.
DWD 120 Waterproofing Membrane Brochure.pdf
Specification of DWD Waterproofing Membranes
|Thickness (mm)||Length (m)||Width (mm)||Area (m2/roll)|
|Note: Width can be customized such as 1500mm, 2000mm, 3000mm and
Features of DWD Waterproofing Membranes
DWD waterproofing membranes have good durability and are not easily
Resistant to a wide range of chemicals and microbial erosion.
DWD waterproofing membranes do not contain any fungicides, heavy
metals and plasticizers.
1. The substrates should be cleaned, leveled, and free of large
aggregate particles and cracks.
2. Preparing the adhesive - cement adhesive (1Kg) configured with
50Kg cement added with 27.5Kg to 32.5Kg water (55%~65% ratio of the
3. Spreading the cement adhesive evenly on the waterproof parts of
4. Laying DWD waterproofing membranes flat on the leveling layer.
The waterproofing membranes’ overlaps should be 8 to 10 cm and
welded with hot air guns. The number of waterproofing membrane
seams is as small as possible. Generally laying the side walls and
complex parts such as drains, grooves, etc.first.
5. When the bottom of the reservoir is laid, the side walls and the
bottom are spliced together to form a whole. At the junctions of
the bottom of the reservoir and the side walls, laying a concave
arc transition with a radius of about 2~3cm.
6. For important parts of the laid waterproofing membranes, such as
corners, joints, holes, and anchor nails weld another lay of
waterproofing membranes to ensure the sealing of the waterproof
7. Laying the additional cement layer or ceramic tile, etc.
8. Cleaning up the construction sites.
Installation of reservoir waterproofing project
More information please contact us: email@example.com
DWD WATERPROOFING is not only a waterproofing membrane manufacturer
but also focus on waterproofing solution. Contact us if you are
interested in our free sample of waterproofing membrane or need