Sign In | Join Free | My lightneasy.org
China QINHUANGDAO DIWEI CONSTRUCTION MATERIALS CO., LTD logo
QINHUANGDAO DIWEI CONSTRUCTION MATERIALS CO., LTD
QINHUANGDAO DIWEI CONSTRUCTION MATERIALS CO., LTD
Active Member

3 Years

Home > Pool Waterproofing Membrane >

Composite Pool Waterproofing Membrane Chemical Corrosion Resistant

QINHUANGDAO DIWEI CONSTRUCTION MATERIALS CO., LTD

Composite Pool Waterproofing Membrane Chemical Corrosion Resistant

  • 1
  • 2
  • 3

Brand Name : DWD WATERPROOFING

Model Number : DWD 120

Certification : ISO

Place of Origin : China

MOQ : Negotiable

Price : Negotiable

Payment Terms : L/C, T/T

Supply Ability : 10000 square meter per day

Delivery Time : 15-20 days generally, or depending on your order.

Packaging Details : Woven bag packaging for every roller

Material : Polyethylene , PE

Thickness : 0.6 - 1.2mm

Density : 360 - 600g/m2

Width : 1150mm to 5800mm Or Customized

Thermally Weldable : Yes

Free Sample : Yes

Contact Now

Chemical Corrosion Resistant Polyethylene Pool Waterproofing Membrane


The pool water often contains chemicals that can damage the structure for long periods of time, which will shorten the life of pools. DWD waterproofing membrane has been used as the waterproof material for pools due to its chemical corrosion resistance properties.


DWD 120 Waterproofing Membrane Brochure.pdf


The feature of DWD waterproofing membranes:

Easy-to-installed.

Bonded with cement adhesive and suited to full-surface bonding.

High-density.

Excellent water resistance, anti-seepage, chemical corrosion resistance, aging resistance, and root resistance.

Good seams strength.

Thermally weldable for seams and joints.
Excellent tensile strength.

Adaptability to deformation and flexibility at low temperature to meet wide temperature range application.
Long service life.

Guarantees are more than 30 years under correctly applied.


Specification

Specification of DWD PE waterproofing membranes please see the table as below.

Thickness (mm)Length (m)Width (mm)Area (m2/roll)
0.660.9

1150

70
0.760.970
0.856.565
0.950.057.5
1.243.550
Note: Width can be customized such as 1500mm, 2000mm, 3000mm and 6000mm, etc.

The performance of DWD 120 waterproofing membranes meets the standard of GB 18173.1-2006 High Polymer Waterproofing Materials as shown below.

ItemParameter/Result
Breaking tensile strength (N/cm)Normal temperature≥60
60℃≥30
Elongation at break rate (%)Normal temperature≥400
-20℃≥10
Tear strength (N)≥20
No leakage performance (0.3Mpa, 30min)No leakage
Bending temperature under low temperature (℃)≤-20
Heating expansion amount (mm)Extension≤2
Contraction≤4
Hot air aging (80 C x 168h)Retention rate of tensile strength (%)≥80
Breaking tensile strength retention rate (%)≥70
Alkali resistance (mass fraction of 10% Ca (OH) 2 solution at normal temperature x 168h)Retention rate of tensile strength (%)≥80
Breaking tensile strength retention rate (%)≥80

Artificial climate aging

Retention rate of tensile strength (%)≥80
Breaking tensile strength retention rate (%)≥70
Bond peel strengthStandard test condition (N/mm)≥1.5
Soaking retention rate (%)Normal temperature x 168h70
composite strength (surface and core layer) (N/mm)≥1.2

Note:

Normal temperature is defined +25℃.

The performances of artificial climate aging, heating expansion amount, breaking tensile strength at 60℃should not consider if waterproofing membranes are non-exposed.

For the total thickness is less than 1.0mm of the resin composite waterproofing membranes, its elongation at break rate should not be less than 50%, and other performances can reach more than 80% of the prescribed value.


Installation Guide

Mechanically installation.

Fasteners can be set in the overlapped membrane edge, and weld the overlapped edge with a hot-air gun.

Adhered installation.

DWD waterproofing membranes can be fully bonded with DWD cement adhesive.

Welded installation.

Can be welded with the auto-moving welding machine to for the smoothest appearance and excellent seams strength.


Seams of waterproofing membranes are a key point in roof waterproofing works. Make sure all the seams are well welded. The overlap of two waterproofing membranes should be more than 50mm for welding.

Roof waterproofing membranes

DWD waterproofing membrane has been used as the waterproof material for pools due to its chemical corrosion resistance properties.


More information or FREE SAMPLE service please email us: info@dwdwaterproofing.com


Product Tags:

swimming pool membrane

      

pond waterproofing membrane

      
Buy cheap Composite Pool Waterproofing Membrane Chemical Corrosion Resistant product

Composite Pool Waterproofing Membrane Chemical Corrosion Resistant Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: QINHUANGDAO DIWEI CONSTRUCTION MATERIALS CO., LTD
*Subject:
*Message:
Characters Remaining: (0/3000)